Gedore 3434834 1504 XL-S-198 Mobile workbench 198-Piece with 7 drawers
Special features
- Ideal for service and maintenance work on agricultural machinery
- With GEDORE Check-Tool-System: Presence check via two-colour foam insert modules
- In workbench no. 1504 XL 1411
- 30 mm thick beech plywood top, surface extra protected by linseed oil varnish
- Large storage space with shelf and door
- 1 XL drawer (W 1055 x D 400 mm), 6 wide drawers (W 640 x D 400 mm), fully extendable, removable
Technical data
- 7 drawers
- Weight 157.5 kg
- Height 985 mm
- Width 1250 mm
- Depth 630 mm
- Worktop thickness 30 mm
- Max load capacity 1000 kg
- 1 x Drawer Type XL, H=75 mm extra wide
- 4 x Drawer Type 1b, H=67 mm
- 1 x Drawer Type 2b, H=137 mm
- 1 x Drawer Type 3b, H=207 mm
Scope of delivery
- Mobile workbench 1504 XL 1411 1.25 m wide
- Screwdriver bit set 1/4“ 620-024
- Handle 1/4" 2098
- Socket wrench 20 4 4.5 5 5.5 6 7 8 9 10 11 12 13 14 mm
- Socket screwdriver 1/4" IN 20 4 5 6 8 mm
- Socket screwdriver ITX 20 T8 T9 T10 T15 T20 T25
- Reversible ratchet 1/4" 2093 U-10
- Slide handle 1/4" 2087
- Extension 2090-2
- Extension 2090-4
- Extension 2090-6
- Universal joint 2095
- Socket wrench 1/2” 19 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 32 33 34 36 mm
- Socket screwdriver 1/2” IN 19 4 5 6 7 8 9 10 12 14 17 19
- Socket screwdriver 1/2” ITX 19 L T20-100 T25-100 T27-100 T30-100 T40-100 T45-100 T50-100 T55-100 T60-100
- Reversible ratchet 1/2“1993 U-10 T
- Sliding handle 1/2“1987
- Extension 1/2“ 1990-3
- Extension 1/2“ 1990-5
- Extension 1/2“ 1990-10
- Extension 1/2“ 1995
- Combination wrenches 1 B 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 30 32 34 mm
- Right-angle hex key set H 42 EL-88
- Right-angle hex keys 42 EL 12 14
- 3C screwdriver short form 2153 5.5
- 3C screwdriver with impact cap 2154SK 3.5 5.5 6.5 8
- 3C screwdriver short form 2161 PH 2
- 3C screwdriver with impact cap 2160SK PH 1 PH 2 PH 3 PH 4
- 3C screwdriver 2163 TX T10 T15 T20 T25 T30 T40
- Blunt flat file 10” 8701 2-10 | 250x25 mm
- Round file 10” 8722 2-10 | 250x10 mm
- Half-round file 10” 8725 2-10 | 250x25 mm
- Water pump pliers 10“ 142 10 TL
- Gedore locking pliers 137 10
- Combination pliers 8210-160 JC
- Side cutting pliers Power 8316-200 JC
- Telephone pliers 8133-180 JC 600H-1500
- Nylon hammer 248 H-50
- Pin punch 119-2 2 3 4 5 6 7 8 9 10 mm
- Center punch 100-12
- Slot chisel 104
- Zipper chisel flat oval 96-175 | 175x17x11 mm
- Feeler gauge 702 13 M
- Gasket scraper 133 K
- Steel tape measure 4534-8 | 8 m
- Pocket caliper 710
- Voltage tester 4610
- Steel brush 644
- Tire lever 39
- Hard foam knee pad 906
- Magnet 640-1800
Comment