Griffon 6313556 PU Foaming Adhesive bottle 750ml transparent (D4)
Special features
- Liquid
- (Sea)waterproof (EN 204 D4)
- Super strong
- Limited filling, foams up slightly
- Solvent-free
- Temperature and weather resistant
- Suitable for indoor and outdoor use
- Paintable
- Sandable
- Liquid, waterproof, polyurethane-based wood construction adhesive
- For the water-resistant (EN 204 D4) (flat) bonding of virtually all types of wood to each other and in combination with many building materials, such as gypsum, (natural) stone, (aerated) concrete, metal, rigid foam and PSE plastics
- Especially for the Gluing and repairing wood structures and joints subject to high demands
- Suitable for, among others, finger joints, dovetails, mortise and tenon joints, dowels, and splines
- Suitable for indoor and outdoor applications, such as facade joinery and sandwich panels. Also for less precise joints (e.g. unplaned wood)
Technical data
- Not suitable for PE, PP, PTFE, and nylon (PA)
- Remove adhesive residue immediately with acetone. Dried adhesive residue can only be removed mechanically. Consumption: 5-6 m²/kg. Store in a well-sealed container in a dry place at a temperature between +10°C and +20°C. Wearing rubber or plastic gloves is recommended. Contents: 750 g. Instructions for use: Apply the adhesive thinly and evenly to one side using a fine-toothed glue comb (1 mm) or brush. Assemble the joint within 30 minutes and press or clamp for at least 4 hours. The desired pressing pressure is 2-5 kg/cm². The ambient temperature, the adhesive, and the materials to be glued must not be lower than +5°C. Relative humidity of maximum 65%. Wood moisture content between 10% and 18% (max. 25%)
- The surfaces to be glued must be clean, dry, and dust-free. Dampen the side to which no glue has been applied with a damp cloth
- Degrease oily wood types with thinner. Roughen non-porous materials
Comment