Griffon 6313648 WoodMax Express Power 380 g
Special features
- Very fast (hand-tight in 30 minutes)
- Extremely high final strength (110 kg/cm²)
- Water-resistant (D4)
- PU & Solvent-free
- Very good filling capacity (up to 4 mm)
- Immediately trowelable
- Permanently flexible
- Paintable
- Weather-resistant
- UV-resistant
- Thiotropic
- Does not foam after application
- Extremely strong, fast, waterproof, di-isocyanate-free and filling wood construction adhesive based on SMP Polymer
- For the waterproof (D4) (flat) bonding of virtually all types of wood to each other and to many building materials, such as gypsum, (natural) stone, (aerated) concrete, metal, rigid foam, and PLS plastics
- Suitable for non-load-bearing timber structures using PLS wood joints, such as mortise and tenon joints, dowels, and splines
- Ideal for both vertical and horizontal applications
Technical data
- Suitable for indoor and outdoor applications, such as facade joinery and sandwich panels. Highly suitable for less precise joints (e.g. unplaned wood)
- Not suitable for PE (polyethylene), PP (polypropylene), and PTFE
- Remove wet adhesive residue immediately with Griffon Cleaner. Dried adhesive residue can only be removed mechanically. >
- Store in a well-sealed container in a dry place at a temperature between +5°C and +25°C.
- Consumption: For dot bonding: 5-8 m²/kg. Markings: approx. 8-15 meters of glue comes from 1 cartridge (nozzle opening 3 mm = ±15 meters – nozzle opening 5 mm = ±8 meters)
- Contents: 380 g
Instructions for use
- Apply the glue evenly, directly from the cartridge, to both sides using a caulking gun
- If necessary, distribute further using a glue comb, brush, or roller
- Ensure sufficient layer thickness
- Assemble the joint within 5 minutes and fix for at least 30 minutes
- Pressing or clamping is not necessary
- If pressing or clamping is necessary, apply limited pressure to prevent too much glue from being squeezed out of the joint
- The temperature of the environment, glue, and materials to be glued must not be lower than +5°C
- The wood moisture content should preferably be between 10% and 18% (max. 25%)
- Surfaces must be clean, dust- and grease-free
- Degrease oily wood types with Griffon Cleaner. Roughen non-porous materials
Comment