Griffon 6314272 EPDM Max 465g
Special features
- Adhesion and sealing on many substrates
- Strong adhesion
- Quick and easy application (no primer)
- Loadable after 24 hours
- Permanently elastic
- Shrink- and blister-free
- Weather-, water- and moisture-resistant
- Temperature-resistant -40°C /+100°C
- Odorless
- Free from solvents, toluene, and phthalates
- Universal, water-resistant adhesive & sealant with strong initial adhesion based on SMP polymer, for EPDM on many substrates
- Bonding and/or sealing of all European EPDM on many substrates such as wood, metal, concrete, stone and rigid foam
- Also suitable for repairing cracks in EPDM and sealing seams between EPDM and permeable substrates
Technical data
- Not suitable for PE, PP, PTFE, bitumen and neoprene substrates. It is recommended to perform an adhesion test on each substrate first.
- Dried residues can only be removed mechanically.
- Keep cartridge tightly closed in a dry, cool and frost-free place. Shelf life: at least 12 months provided stored dry in a closed container between +5°C and +25°C
- Opened packaging has a limited shelf life
- Contents: 465 g
Instructions for use
- Apply adhesive in ridges (6 mm wide) and then press firmly
- Tack-free after 24 hours, final strength after 48 hours on a porous surface
- Processing temperature: +5°C to +35°C
- Apply adhesive to one side on a firm, clean, dust- and grease-free surface
- Before use, open the cartridge at the top by cutting off the plastic nipple above the screw thread with a sharp knife
- Then attach the nozzle and cut it at an angle (opening min. Ø 5 mm)
Comment