Griffon 7000686 WoodMax Transparent Power 320 g
Special features
- Transparent
- Very high final strength (110 kg/cm²)
- Waterproof (D4)
- Solvent-free and di-isocyanate-free
- Good filling capacity (up to 2 mm)
- Immediately trowelable
- Permanently flexible
- Paintable
- Weather-resistant
- UV-resistant
- Thiotropic
- Good stability, does not drip
- Extremely strong, transparent, waterproof, di-isocyanate-free and filling wood construction adhesive based on SMP Polymer
- For the waterproof (D4), transparent (flat) bonding of virtually all types of wood to each other and to many building materials, such as gypsum, (natural) stone, (aerated) concrete, metal, rigid foam, and PLS plastics
- Suitable for non-load-bearing timber structures using PLS wood joints, such as mortise and tenon joints, dowels, and splines
- Ideal for both vertical and horizontal applications
Technical data
- Suitable for indoor and outdoor applications, such as facade joinery and sandwich panels. Highly suitable for less precise joints (e.g. unplaned wood)
- Not suitable for PE (polyethylene), PP (polypropylene), and PTFE
- Remove wet adhesive residue immediately with Griffon Cleaner. Dried adhesive residue can only be removed mechanically. >
- Store in a well-sealed container in a dry place at a temperature between +5°C and +25°C.
- Contents: 380 g
Instructions for use
- Apply the adhesive evenly, directly from the cartridge, to one or both sides (depending on application) using a caulking gun.
- If necessary, distribute further using an adhesive comb, brush, or roller.
- Ensure sufficient layer thickness.
- Assemble the joint within 30 minutes and fix for at least 3 hours.
- Pressing or clamping is not necessary.
- If pressing or clamping is necessary, apply limited pressure to prevent too much adhesive from being squeezed out of the joint.
- The ambient temperature, adhesive, and materials to be glued must not be lower than +5°C.
- The wood moisture content should preferably be between the 10% and 18% (max. 25%)
- Degrease oily wood types with Griffon Cleaner. Roughen non-porous materials
Comment