Metal Works BDP50SETB Construction dryer set BDP50 + fan MV500PPL
Special Features BDP50
- Industrial construction dryer 50 l/day in PE with drain pump.
- Shock-resistant housing in Polyethylene.
- High-quality impact-resistant Polyethylene housing. PE does not rust, is particularly strong, and continues to look good even after years of use. This construction dryer has a long service life thanks to the high finish quality of the rotationally molded PE housing.
- Dehumidification capacity: 50 liters per 24 h
- Built-in lift pump with 5 m hose included. The pump can pump the condensate water up 5 m, making these dryers perfectly suitable for use in basements and underground spaces without a sewer connection.
- No built-in tank, and therefore no problems with full or overflowing water tanks. The dryer can therefore continue to operate 24/7 and continuously drain the condensate.
- Automatic defrost function at temperatures below 10 °C guarantees operation at lower temperatures.
- Environmentally friendly refrigerant R290. This construction dryer contains no harmful gases; The cooling compressor is built using the latest technology in refrigeration.
- Automatic operation with hygrostat
- Sturdy fixed steel handle
- Digital display with simple operation
- Washable and reusable air filter
- Combinable with BDP90
Special Features MV500PPL
- Wide blowing angle, dries large areas of the room in one go without relocation
- Adjustable blowing direction (tiltable on optional base)
- 2 speeds, always the optimal airflow
- Shock-resistant housing in high-density polyethylene
- Completely plastic, never rusts
- Power 200W
- Diameter 500mm
- Flow rate 106.3 m³/min
Advantages BPD50
- Time-saving: faster drying of plaster, screed, and concrete, especially in cold and damp conditions
- Allows your construction sites to dry out many times faster
- Cost-saving: no more long waiting times on the construction site
- Faster construction, laying floors, parquet, ... without risk of residual moisture
- Avoid moisture and mold problems
- Optimal results in combination with an MV mobile fan
- Pre-assembled in the packaging
Applications BDP50
- On construction sites: plaster, concrete, floor screeds, ...
- For moisture problems after a water leak or flood
- Improving air quality in permanently damp rooms: basements, laundry rooms
- For moisture-sensitive materials such as paper, metal goods, wood stock, etc.
- These plastic models do not rust, so they are ideal for use by the sea or at a swimming pool.
- These strong and robust PE models are also perfectly suitable for rental or if they need to be moved frequently.
- The capacity of construction dryers is specified for heated rooms. Warmer air can hold more water vapor, so the efficiency of the construction dryer is higher.
- At very low temperatures, the output capacity is lower.
Technical data BDP50
- Voltage V 230
- Frequency Hz 50
- Power W 700
- Air displacement m³/h 595
- Capacity l/24h 50
- Operating temperature °C 5-35
- Humidity control range % 35 ~ 95
- Pump head m 5
- Noise level dB(A) 4m 58
- Refrigerant R290
- Automatic defrost Yes
- Timer No
- Weight kg 35.00
- Dimensions (lxwxh) mm 480x550x840
Technical data MV500PPL
- Power W 200
- Frequency Hz 50
- Insulation degree F
- Diameter mm 500
- Voltage V 230
- Flow rate m³/min 106.3
- Number of speeds 2
- Noise level dB(A) 4m 72
- Speed rpm 1400/1240
- Housing PE
- Fan blade PE IP 20
- Weight kg 13.00
- Dimensions (lxwxh) mm 550x365x575
Scope of delivery
- On pallet
- Construction dryer BDP50
- Fan MV500PPL
Comment