Metal Works BDP90SETB Construction dryer set BDP90 + fan MV500PPL
Special Features BDP90
- Industrial construction dryer 90L/day in PE with drain pump.
- Shock-resistant housing in Polyethylene.
- High-quality impact-resistant Polyethylene housing. PE does not rust, is particularly strong, and continues to look good even after years of use. This construction dryer has a long service life thanks to the high finish quality of the rotationally molded PE housing.
- Dehumidification capacity: 90 liters per 24 h
- Built-in lift pump with 5 m hose included. The pump can pump the condensate water up 5 m, making these dryers perfectly suitable for use in basements and underground spaces without a sewer connection.
- No built-in tank, and therefore no problems with full or overflowing water tanks. The dryer can therefore continue to operate 24/7 and continuously drain the condensate.
- Automatic defrost function at temperatures below 10 °C guarantees operation at lower temperatures.
- Environmentally friendly refrigerant R290. This construction dryer contains no harmful gases; the cooling compressor is built according to the latest technology in refrigeration.
- Automatic operation with hygrostat
- Sturdy fixed steel handle
- Digital display with simple operation
- Washable and reusable air filter
- Combinable with BDP50
Special Features MV500PPL
- Multifunctional fan with 2-speed motor: 2 speeds and 2 wattages. Particularly lightweight and portable. The ideal fan for drying in construction, during cleaning work, or in the event of water damage.
- Usable with optional 10-meter intake/exhaust hoses
- Stackable up to 3 units. Can be connected in series up to 2 using the standard brackets included.
- Suitable for: Drying wet rooms in a very short time (office, school, public building)
- Drying on construction sites (plastering, screed, ...)
- Faster drying, in combination with construction dryers.
- Air circulation and ventilation of oxygen-deficient rooms
- Removal of gases and bad odors
Benefits of the BPD90
- Time-saving: faster drying of plaster, screed, and concrete, especially in cold and damp conditions
- Allows your construction sites to dry out many times faster
- Cost-saving: no more long waiting times for the construction site
- Faster construction, laying floors, parquet, ... without risk of residual moisture
- Avoid moisture and mold problems
- Optimal results in combination with an MV mobile fan
- Pre-assembled in the packaging
Applications BDP90
- On construction sites: plaster, concrete, screeds, ...
- For moisture problems after a water leak or flood
- Improving air quality in permanently damp rooms: basements, laundry rooms
- For moisture-sensitive materials such as paper, metal goods, wood stock, etc.
- These plastic models do not rust, so they are ideal for use by the sea or near a swimming pool.
- These strong and robust PE models are also perfectly suitable for rental or if they need to be moved frequently
- The capacity of construction dryers is specified for heated rooms. Warmer air can hold more water vapor, so the efficiency of the construction dryer is higher.
- At very low temperatures, the output capacity is lower.
Technical data BDP90
- Voltage V 230
- Frequency Hz 50
- Power W 770
- Air displacement m³/h 850
- Capacity l/24h 90
- Operating temperature °C 5-35
- Humidity control range % 35 ~ 95
- Pump head m 5
- Noise level dB(A) 4m 72
- Refrigerant R290
- Automatic defrost Yes
- Timer No
- Weight kg 48.50
- Dimensions (lxwxh) mm 470x550x1030
Technical data MV500PPL
- Power W 200
- Frequency Hz 50
- Total pressure Pa 210/185
- Insulation degree F
- Diameter mm 500
- Voltage V 230
- Flow rate m³/min 106/90
- Speed rpm 1400/1200
- Number of speeds 2
- Noise level dB(A) 72
- Housing PE
- Fan blade PE IP 20
- Weight kg 17.50
- Dimensions (lxwxh) mm 550x365x575
Scope of delivery
- On pallet
- Construction dryer BDP90
- Fan MV500PPL
Comment