Soudal 154347 Mounting Kit Fix -All X-Treme Power X-Press White 280ml
Fix ALL® X-treme Power Express is suitable for bonding extreme loads without support. Fix ALL® X-treme Power Express has an initial strength of up to 400 kg/m² and is touch-tight after only 30 minutes. Even stronger after full curing.
Special features
- Extremely high initial tack of at least 400 kg/m²
- Very quickly becomes tack-free and builds strength quickly in a thin adhesive layer and on porous substrates
- Fast curing
- Easy to apply using the standard triangular nozzle supplied
- Permanently elastic after curing and very durable
- Virtually odorless
- Excellent resistance to UV rays and other weather influences
- Very good adhesion to most substrates, even slightly damp
- Paintable with water-based paints
- No staining (edge zone contamination) on porous substrates such as marble, granite, and other natural stone types
Applications
- Bonding in the construction and metal industries
- Bonding and mounting objects, panels, sheets, planks ... on a wide variety of materials
- For bonded facade panels, we refer to the Soudal Panel System
Technical data
- Base: SMX Hybrid Polymer
- Consistency: Stable paste
- Curing system: Polymerization by air humidity
- Skin formation (23°C/50% RH): Approx. 4 min
- Curing rate (23°C/50% RH): Approx. 2 mm/24h
- Hardness: Approx. 75 ± 5 Shore A
- Density: Approx. 1.48 g/ml
- Max. permissible deformation: ± 20 %
- Max. stress (ISO 37): Approx. 3.60 N/mm²
- Modulum of elasticity 100% (ISO 37): Approx. 2.90 N/mm²
- Elongation at break (ISO 37): Approx. 200 %
- Touch-tight: After 30 min (after pressing firmly)
- Temperature resistance: -40 °C – 90 °C
- Processing temperature: 5 °C – 35 °C
Instructions for use
- Apply the adhesive to one of the materials to be bonded using a caulking gun in even triangular beads (every 15 cm) or dots. Always apply an adhesive bead or dot to the ends and along edges and corners of sheet material. Attach the material and tap firmly with a rubber mallet. If necessary, brace or support the bonded materials. The adhesive bond can be fully loaded after 24-48 hours.
Safety recommendations
Observe standard occupational hygiene. Consult the packaging for more information.
Comment