Steinel 052546 Sensor Spot LS 150 LED Black
Special features
- Plenty of light with style
- The powerful LED sensor spot LS 150 LED illuminates large areas around the house with a light output of 1760 lm and keeps unwanted guests at bay
- Thanks to its integrated infrared sensor, it intelligently and reliably brings light into the darkness
- In doing so, it emits a pleasant warm light of 4000 K
- With its consumption of only 20.5 W, this spot proves that it is also a shining example in economic terms
- The pleasant and understated design integrates perfectly into the surroundings and ensures a harmonious overall picture
- This powerful LED spot with a cast aluminium head is available in black and white.
Technical specifications
- Version: Outdoor luminaire
- Housing material: Aluminium
- Lamp type: Non-replaceable LED
- Length: 176 mm
- Surface protection:
- Width: 155 mm
- Sensor type: Passive infrared
- Dimmable: No
- With light source: Yes
- Color temperature: 4000 K
- Voltage type: AC
- Protection degree (IP): IP44
- Protection class:
- Max. System power: 20.5 W
- Light color: White
- With motion sensor: Yes
- With light sensor:
- Suitable for ceiling mounting: No
- Suitable for pendant suspension: No
- Housing color: Black
- Color rendering index: 80-89
- Lamp holder:
- Suitable for truss mounting: No
- Suitable for pedestal/floor mounting: No
- Suitable for track mounting: No
- Suitable for lamp power: 20.5 W
- Suitable for clamp mounting: No
- Connection type: Other
- Adjustability:
- Ballast: Electronic transformer
- Ballast included: Yes
- Reflector: None
- Light distribution: Symmetrical
- Beam angle: Extremely wide beam >80°
- Height/depth: 210 mm
- Luminaire with limited surface temperature "D-mark" according to EN 60598-2-24: No
- Effective luminous flux according to IEC 62722-2-1: 1760 lm
- Impact resistance: IK03
- Luminaire cover with thermal insulation material possible: No
- Cover material:
- Light output: Direct
- Number of poles: 2
- Power factor: 0.6
- Luminous flux: 1760 lm
- Dimming dependent on ballast: No
- Nom. Ambient temperature according to IEC62722-2-1: -10 / 40 °C
- Dimmable DSI: No
- Wiring type: Suitable for through-wiring
- Glow wire test according to IEC 60695-2-11: 650 °C - 30 s
- Suitable for low-voltage cable system: No
- Dimmable DMX: No
- Dimmable with push-button: No
- Dimmable Zigbee: No
- Dimmable Sine Wave Reduction: No
- Dimmable LineSwitch: No
- Light distributor: None
- Protection degree (NEMA):
- Dimmable Touch and Dim: No
- Specific luminous flux luminaire: 85.8537 lm/W
- Non-dimmable: Yes
- Dimmable with potentiometer (integrated): No
- Dimmable RF: No
- Dimmable phase cut-off: No
- Photobiological safety according to EN 62471: RG1
- Dimmable mains voltage modulation: No
- Dimmable DALI: No
- Manufacturer-specific dimming: No
- Dimmable 0-10 V: No
- Dimmable 1-10 V: No
- Programmable dimming: No
- Dimmable phase cut-on: No
- Color consistency (McAdam ellipse): SDCM3
- Suitable for flush mounting: No
- Surface brushed:
- Suitable for display work according to EN 12464-1: No
- Suitable for surface mounting: Yes
- Integrated emergency power supply:
- Horizontal reach angle: 240 °
- Max. mounting height: 6 m
- Min. run-on time: 10 s
Comment