Tec7 535206-12 Mounting sealant cartridge 310 ml White 12 pieces + free Perfect Finish Smoothing Set
For over 20 years, TEC7 has been the best-known sealant for gluing, sealing, and fastening. When it really has to be good, professionals and advanced DIYers reach for the TEC7 cartridge. And rightly so! TEC7 is the first choice for 80% of all applications.
TEC7 replaces assembly adhesive, wood glue, PU glue, silicone sealant, acrylate sealant, ...
Special features
- Very good adhesion to almost all substrates
- Does not affect plastics, polystyrene, and mirrors
- Highly UV-resistant
- Does not bleed out on natural stone Mold-resistant
- Very suitable for use on damp surfaces, even underwater
- Paintable with most paints Salt water resistant
Technical data
- Sprayability (5 bar/ 3 mm/ 23°C): 140 g/min.
- Skin formation (23°C 50% RH): 8 minutes
- Tack-free (23°C 50% RH): 25 minutes
- Curing (23°C 50% RH): 24h – 6 mm 48h – 7 mm 72h – 8 mm
- E-Modulus: 100% 172 N/cm² / 1.72 MPa
- Volume shrinkage after curing: < 3%
- Hardness: DIN 53505 60 Shore A
- Tensile strength: 265 N/cm² / 2.65 MPa
- Tear strength: DIN 53507 140 N/cm² / 1.40 MPa
- Thermal stability: -30°C to +95°C / Peak: 155°C (max. 30 min.)
- Elongation at break: DIN 53504 > 350 %
- Non-toxic
- Chemical resistance: good: water, seawater, aliphatic solvents, oils, greases, diluted organic acids, alkalis moderate: esters, ketones, aromatics poor: concentrated acids, chlorinated solvents, swimming pool chlorine
- Shelf life 12 months
- Delivery form: 310 ml cartridge in white
Tips from TEC7
- Good preparation is the secret of all professionals.
- Use FOAM7 as a universal degreaser/cleaner.
- For organic contamination and/or large surfaces, HP7 is your best degreaser.
- Use the ergonomic TEC7 Gun for application of TEC7.
- This helps you avoid complaints resulting from RSI (repetitive strain injury).
- Every bond is only as strong as the substrate.
- If your substrate is too weak, you can reinforce it with EPOFIX7, a deep-penetrating epoxy primer.
- TEC7 and other MS polymers adhere less well to Polypropylene (PP), Polyethylene (PE), PTFE (Teflon®), bitumen, and silicone.
- Always perform an adhesion test.
- Alkyd resin-based paint applied to TEC7 may have a longer drying time.
- For very flexible finishes or joints, we recommend FLEX7.
- Do you want to hang heavy objects very precisely? X-TACK7 is your best choice for heavy-duty mounting where extremely high initial adhesion is required.
- For anchoring and fast For bonding applications, we recommend 2-K MIX7.
- Cleaning of tools: TEC7 Cleaner and/or MAGIC CLEAN7.
- Hand cleaning: MAGIC CLEAN7.
Scope of delivery
- 12x cartridge 310 ml Tec7 color white (535206000)
- 1x Tec7 Perfect Finish smoothing set (315020290)
Comment