TEC-7 6-piece Starter Pack
Special features GT7
- GT7 is a genuine TEC7 product.
- One product, many applications? Check!
- Innovative? Check!
- Very high quality? Check!
- GT7 is a highly versatile spray that frees up a lot of space on your warehouse shelves: deep-penetrating moisture displacer, powerful rust inhibitor, penetrating oil: loosens what is stuck, high-quality lubricant, contact spray: perfect electrical contacts, cleaner, protection of all surfaces
Technical data GT7
- Boiling point: 187°C – 211°C
- Vapor pressure at 20°C, Pa: 100
- Relative density at 20°C: 0.808
- Physical state at 20°C: liquid
- Flash point: 67°C
- Autoignition: 255°C
- Water solubility: insoluble
- Dynamic viscosity at 20°C: 1 mPa.s
- Kinematic viscosity at 20°C: 1 mPa.s
- Protection time: 8-12 months, the duration of protection can be extended by applying GT7 regularly.
- Outdoors, this protection time may change depending on weather conditions.
- Shelf life: 3 years
Special features Super
- Super is much more than 'just' a rock-solid super glue.
- It is a very fluid and crystal-clear adhesive with a very wide range of applications. repair paste with sand or sawdust as filler iron-strong adhesive for very thin layers transparent all-purpose adhesive use in combination with SUPER Activator for porous surfaces the activator accelerates curing, even on smooth surfaces
Technical dataSuper
- Form: dropper bottle
- Base: cyanoacrylate
- Color: colorless, transparent
- Viscosity: very low, thin flow
- Specific gravity: 1.05 – 1.09 kg/m³
- Flash point: 87°C
- Consumption: 1 drop ≈ 0.02g ≈ 3 to 5 cm² adhesive surface
- Adhesion: very good on most materials; not suitable for: Polypropylene (PP), Polyethylene (PE), Teflon® (PTFE), and other engineering plastics may cause adhesion problems
- After curing: Temperature resistance: permanent: -30°C / +80°C peak: +100°C above 200°C to 250°C the bonds dissolve good resistance to temperature fluctuations and weather influences
- Chemical resistance: resistant to many solvents, oil, benzene, many chemicals; not resistant to strong solvents and strong alkalis. slowly soluble in: dimethylformamide, ethyl acetate, acetone, methylene chloride.
- Electrical resistance: insulator volume resistance DIN 53482* = > 1015 Ohm.cm dielectric strength DIN 53481* = 11-13 kV/mm * = measured on adhesive joints
- Adhesive thickness: max. 0.8 mm when used with activator max. 0.2 mm without activator thinner layers result in stronger bonding
- Shrinkage: negligible at the prescribed layer thicknesses
Technical data SUPER Activator
- Form: aerosol
- Base: polymerization catalyst in solvent
- Color: light amber to colorless
- Viscosity: very low, thin flow
- Specific gravity: approx. 0.6 kg/dm³
- Flash point: highly flammable
- Consumption: depending on the porosity of the substrate and the application technique. hundreds of bonding applications are possible with 1 spray can (200ml)
Powerwipes Features
- clean and degrease: hands, tools, engines, boats, motorcycles, ... efficient against ink, printing inks, marker, oils, greases, nicotine, graffiti, … remove uncured synthetic resins, MS polymers, silicones, PUR foam, … fresh fragrance and skin-friendly composition, to d
Comment